Advantage of product
1.Easy to program- no need for software or PC
2.Reliable function for wooden panel only
3.Automatic on lock function
4.Lower battery notification function when voltage drops to 3.6V
5.Simple to install at all time
6.The front sensor can also be used as handle
7. The latch will goes in while the power is below certain voltage.
Power Consumption
Around 8~12 months
Item No.:
SDWC - 507KC : 125 KHZ
SDWC - 507KC - M1 : 13.56 MHZ
SDWC - 507KC - FELICA : 13.56 MHZ
Material : ABS striking plate
Finish :
Knob - Matte chrome
Housing - Black
Power supply : 3 standard AAA alkaline batteries
Function card :
1. MANAGEMENT(PROGRAMMING) CARD - is used to create user card
2. User card is the key of the lock
The same RF card can be shared by all the lock
Accessories :
3 non programming cards ( need to be programmed by user )
1 ABS striking plate
1 set of screw
1 steel plate to fix the back side
** Optional : PS-002 Emergency external power supply case or
PS-003 Emergency power cable ** ( A-8 )
** Battery is not included **